Product Description
Herolift Glass Vacuum lifting machine is a fast, safe and convenient automatic equipment. It uses the principle of vacuum adsorption and uses the vacuum pump as the vacuum source to generate a vacuum at the suction cup end, so as to firmly hold various workpieces (such as glass, iron plates, etc.) Pick up, and transport the workpiece to the designated position through the rotatable mechanical arm.
The glass vacuum lifter is used for handling and transferring various kinds of sheets, and widely used in glass deep processing industry.The lifter is composed of cantilever and handling arm, both part could be customized.
Characteristic
Max.SWL 800KG
1. Manually rotated 360° in the vertical side, and manually rotated 90° in the horizontal side, but taking and releasing by electric
2. Both ends of the suction cup holder are retractable, suitable for occasions with large size changes
3. Imported oil-free vacuum pump, valve
4. Efficient, safe, fast and labor-saving
5. Accumulator and pressure detection ensure safety
6. Suction cup position adjustable and can be closed manually
7.Usually copperated with bridge crane to use in glass deep processing and handling job, or with cantilever crane to use in glass curtain wall installation job.
| Serial No. |
GLA800-8-B-M |
Max capacity |
800kg |
| Overall Dimension |
3200*1300*500mm |
Power supply |
4.5-5.5 bar compressed air, Consumption of compressed air 75~94L/min
|
| Control mode |
Manual hand slide valve control Vacuum suction and release |
Suction and release time |
All less than 5 seconds; (Only the first absorption time is slightly longer, about 5-10 seconds) |
| Maximum pressure |
85%vacuum degree(about0.85Kgf) |
Alarm pressure |
60%vacuum degree
(about0.6Kgf) |
| Safety factor |
S>2.0;Horizontal handling |
Dead weight of equipment |
180kg(approximate) |
Power failure
Maintaining pressure |
After power failure, the holding time of the vacuum system absorbing the plate is >15 minutes |
| Security alarm |
When the pressure is lower than the set alarm pressure, the audible and visual alarm will alarm automatically |
Features
 |
|
Suction pad
•Easy replace
•Rotate pad head
•Suit various working conditions
•Protect workpiece surface |
Power control box
•Control the vacuum pump
•Displays the vacuum
•Pressure alarm |
|
|
Vacuum gauge
•Clear display
•Color indicator
•High-precision measurement
•Provide security |
Vacuum pump
•Create vacuum power
•High negative pressure
•Low energy consumption
•Stable performance.
|
Specification
| Model |
GLA400-4-B-M |
GLA600-8-B-M |
GLA800-8-B-M |
| Max. load capacity |
400kg |
600kg |
800kg |
| Performance |
Load Movement: Manual rotation, 360° edgewise, with locking at each quarter point Manual tilt, 90°between upright and flat, with automatic latching in upright position. |
| Power System |
DC12V |
DC12V |
DC12V |
| Charger |
AC110-220V |
AC110-220V |
AC110-220V |
| Quantity of sucker |
6 |
8 |
8 |
| Packing Size |
1000X1000mmX490mm |
Total Height: 3.7meters
Arm Length: 3.5meters
(The column and swing arm are adjusted according to the actual situation of the customer)
Column specifications: Diameter 245mm,
Mount plate:Diameter 850mm
Matters needing attention:The thickness of ground cement≥20cm
|
Detail display
| 1 |
Lifting hook |
7 |
Extension beam |
| 2 |
General Control box |
8 |
Suction Pads |
| 3 |
Power switch |
9 |
Control handle |
| 4 |
Buzzer |
10 |
Air tube |
| 5 |
Vacuum gauge |
11 |
Vacuum pump |
| 6 |
Volta meter |
12 |
Support leg |
Advantage
1. This machine is widely used in transition of various kind of hollow glass, laminated glass, raw glass and tempered glass, etc.
2. American DC vacuum pump+ DC battery are adopted; When using, there is no need to connect other air source or power source.
3. Digital display vacuum pressure switch and battery charge indicator, which can monitor safe operation of equipment more clearly.
4. With vacuum pressure charging system, equipment can ensure the whole vacuum system within a relatively constant safe pressure value during transition.
Application
Glass Boards
Aluminum Boards
Steel Boards
Plastic Boards
Stone Slabs
Laminated chipboards
Service cooperation
Since its establishment in 2006, our company has served more than 60 industries, exported to more than 60 countries, and Established a reliable brand for more than 18 years.
Company Profile
Our Advantages
Production Line
Certifications
Packaging & Shipping
FAQ
Q1: How can I get the best machine for me?
A: You can tell us your working material, detail work by picture or vedio so that we can judge whether our machine can meet your need or not. Then we can give you the best model depends on our experience.
Q2: This is the first time I use this kind of machine, is it easy to operate?
A: We will have the free technical training, and send you Software Operating Instructions in English, it can teach you how to operate the machine. If you still can not learn how to use it, we can talk by phone, email or other contact ways.
Q3: If the machine has problem in my place, how could I do?
A: We could send free parts to you in warranty period if machines have any problem under "normal use". you need to pay the postage.
Q4: What's the guarantee, in case the machine breaks down?
A: The machine has one year guarantee. If it breaks down, generally speaking, our technician will figure out what the problem may be, according to clients feedback. Parts except for consumable parts will be replaced for free if the problems are caused by quality fault.
Q5: How long is the delivery time?
A: For standard machines, it would be 20-30 days; For non-standard machines and customizedmachines according to client s specific requirements, it would be 45 to 60 days.
){kind=link}